Price this PC

What do you rekon the cost (in UK) would be for a PC like this (custom built)?


Computer Case: Black ATX Tower Case
CPU: Intel Pentium G2020 (2 x 2.9 GHZ)
CPU Heatsink: Intel Heatsink & Fan - Low Noise
Memory: 2 GB 1333MHz (1x2GB) - (DDR3)
Graphics Card: NVIDIA GeForce GT 620 - 1 GB - (GAINWARD) - (PCI-E)
Motherboard: Gigabyte GA-B75M-D3H (Intel B75) - VGA/DVI/HDMI
Networking: Motherboard Integrated Ethernet Lan (Broadband Ready)
Expansion Cards: 4 x USB 2.0 Ports (PCI)
Power Supply: Cooler Master 500W PSU - Low Noise
Hard Drive: 1 TB Seagate (1000 GB) SATA-III HDD 7200 RPM 64MB

N.B. Sound Card not included due to one already owned. No Operating System as Windows 7 Ultimate already owned. 2x4GB RAM already owned and can be added.

Any thoughts?

It depends on where you get your parts. My husband built mine with similar specs for a little under $300, but that was because he bought a barebone pc that had a lot of that stuff in it but was missing the hdd. Which, I already had.

Where are you looking for parts? Have you tried pricewatch.com?
 
Does anyone know if I can have a SATA II and SATA III drive in my PC?

Was just wondering, seeing as my new PC will have a SATA III drive, if I could put my old SATA II drive in as a secondary drive which means I wouldn't have to back so much up.
 
New PC should be arriving today via UPS. Was meant to come yesterday but UPS fucked up which was annoying cause i'm using up leave to wait in for it.

12:40 and not here yet.  :confused:
 
Haha, never guess what I did!

Got my PC out of it's box. Stood it up right. Took the side off, inserted my DVD drive and connected it up, inserted my spare RAM, sealed the box back up, switched the PC on, installed Windows 7 and loads of other stuff.

Whilst in the middle of installing a few things, I realise the top of the case has feet.... lol I've stood it up the wrong way round. Simple solution, I turned it over. During installing from a CD it made a bit of noise turning the PC upside down, but it was fine.

Then the real realisation kicked in, I ejected the CD and the CD fell on the floor because the DVD drive was put in upside down because the PC was originally upside down!!!! DOH!
 
Sadly yes, although it's resolved now, but it is very annoying.

So there I was working on some of my videos. I use Movie Maker to make the WMV file at the initial stage. Anyway, when saving it as WMV, and it's only a 2 minute video, the computer crashes, shows a blue screen - physical memory dump - then reboots. It does this again at various times usually when i'm running several programs and always when trying to save the WMV.

I put the issue down to the RAM. I downloaded memtest and ran that and immediately it detected an error with the RAM. Of course there is no way to tell which stick of RAM it is or even if it's one of the slots that's faulty. So I remove the 2 sticks I added and ran the memtest against the 2GB Ram that came with the PC. No errors. So I added one of the 4GB sticks, ran the test and immediately showed an error.

So I removed that stick and replaced it with the other 4GB stick. Ran the memtest and no errors. Then I decided to test Movie Maker. It managed to save the 2 minute video as a WMV quickly with no problems.

So, issue resolved, but annoying as I now have 6GB instead of 10GB. However, it's better than the 2GB my old PC had.
 
Yeah, 2 kind of sucks, so at least you have that extra 4. I don't think RAM costs much, unless it's 32 GB or in a Mac. >_>
 
Back
Top